Chair Cane

Seatweaving Supplies – Quality Products with Prompt Delivery

Chair Cane

Shop Now For Quality Chair Cane Materials

Chair Cane is used in the weaving of seats and backs of chairs with holes drilled around the frame. A 270 foot coil will cane a chair that is approximately 12 x 12″ with 72 holes or less. 1000 feet will weave about 4 chairs.

Chair cane has many names such as hand cane and natural strand cane. Chair cane is the bark of the rattan palm and has been used for seat weaving for centuries.

Superior quality cane for chairs that have drilled holes around the perimeter. See our Chair Caning Booklet for how to cane chairs  instructions. (If your chair has a groove, go to our  Cane Webbing page.)

All Chair Cane Supplies are not created equal! We’re proud to offer our customers the highest quality of Chair Cane Supplies.

What size Chair Cane do you need for your chair cane project?

Use the chart below to determine the size of chair cane needed for your chair caning project. Be sure that the holes in your seat are cleared and smooth with no sharp edges. Measure the size of the drilled holes in the chair seat frame. Then measure the distance between the holes in the chair seat frame. Measure this distance from the center of one hole to the center of the next hole.

Chair Cane Size

Cane Width

Size of drilled holes

Distance between holes,   center to center

Fine Fine 2.25 mm 3/16″ 1/2″
Fine 2.50 mm 3/16″ 9/16″
Narrow Medium 2.75 mm 1/4″ 5/8″
Medium 3.00 mm 1/4″ 3/4″
Common 3.25 mm 5/16″ 7/8″

  Binder Cane is approximately twice as wide as regular chair cane. We sell 4 mm, 5 mm and 6 mm binder cane.

  • Binder cane is suitable as a sturdy seat weaving materials  for woven seats on porch rockers (Kennedy rockers, etc.), and other porch chairs.
  • Binder cane has a shiny, durable bark side and a dull backside. See our Seat Weaving Booklets page for instructions.

Chair Caning Booklet

12-page Chair Caning Booklet with illustrated how-to’s. Get this booklet when you’re weaving a seat with drilled holes in frame. If the woven part of the seat is 12″ or less, one 270′ coil is the amount you need. This is the same booklet that comes with our Chair Caning Kit.

Chair Cane MEDIUM 3 mm – 1000 ft

270 ft. is enough to weave one 12×12″ seat. 1000 ft. is enough to weave four 12×12″ seats.

All chair cane comes with Binder Cane strands.

270′ coil includes ONE binder. 1000′ coil include FOUR binder strands.

Binder Cane – 500 ft

Use Binder Cane for weaving Finger Lakes Fan, Herringbone, and New England Porch Weave seats. Select an instruction booklet here.

Chair Cane NARROW MEDIUM – 2.75 mm – 270 ft

270 ft. is enough to weave one 12×12″ seat. 1000 ft. is enough to weave four 12×12″ seats.

All chair cane comes with Binder Cane strands.

270′ coil includes ONE binder. 1000′ coil include FOUR binder strands.

Chair Cane – Seatweaving Supplies